Temperature Coefficient Research Articles

Processing strategy and composite regulation on dielectric performance in Li2O–Al2O3–B2O3 dielectric systems using SrTiO3

AbstractIn this paper, we investigated the effect of processing parameters and composite regulation on the structure and property relationship of lightweight low‐permittivity Li2O–Al2O3–B2O3 dielectric system. Li2BAlO4 ceramic and (1 − x)Li2BAlO4–xSrTiO3 ceramics were synthesized using a conventional solid‐state reaction method. Thermodynamic analysis, sintering temperature, phase formation, crystal structure, and microwave dielectric properties were investigated. Thermal analysis revealed a melting temperature of 847°C, suggesting a comparatively low temperature for the sintering of Li2BAlO4 ceramics. Li2BAlO4 crystalized into a monoclinic structure with P21/c space group, with [Al2B2O8] rings connected by [BO3] triangles and [AlO4] tetrahedra through Al–O–Al bridges. Dense Li2BAlO4 ceramics with a relative density of ∼97.7% were sintered at 750°C and had optimal microwave dielectric properties with relative permittivity (εr) of 5.13, quality factor (Q × f) of 22 610 GHz, and the temperature coefficient of resonance frequency (τf) of −112.5 ppm/°C. The 0.88Li2BAlO4–0.12SrTiO3 composite ceramic has excellent microwave dielectric properties with εr = 8.83, Q × f = 14 000 GHz, τf = 4.6 ppm/°C. The ceramics also demonstrated an inert behavior with silver electrodes proving its application in low‐temperature cofired ceramic (LTCC) technology.

Seismic Response Study of S-Wave Incident Stratified Unsaturated Soil Site Under Thermal Effects

ABSTRACT Drawing upon the fundamental principles of mixture continuum and thermodynamics, planar S-wave incident model for layered unsaturated soil is formulated. Employing the Helmholtz vector decomposition principle, the wave field within the layered unsaturated soil is analyzed using the transfer matrix method, accounting for the influence of thermal effects. An analytical solution is obtained for the seismic response in layered unsaturated soil under the action of thermal effect. The results of the numerical analyses show that the thermo-physical parameters such as relative heat of solid, temperature, and thermal expansion coefficient have a notable effect on the seismic response of the site.

Investigating a Cylindrical Dielectric Resonator Antenna Fabricated with Li3MgNbO5 Microwave Dielectric Ceramic

This work aims to fabricate a single-feed line Cylindrical Dielectric Resonator Antenna (CDRA) using low-temperature sintered Li3MgNbO5 microwave dielectric ceramic as a resonator, excited in HEM11δ mode. The ceramic synthesized using the conventional solid-state route resulted in a single-phase material exhibiting a cubic structure with an Fm-3m space group. The densely packed cylindrical disk of the ceramic was subsequently characterized for its microwave dielectric behaviour in TE01δ mode using the Hakki-Coleman method. The dielectric permittivity (ε r) measures 14.4, with a loss factor (tan δ) nearly equal to 4.01 × 10−4 and a temperature coefficient (τf) of −50.9 ppm °C−1. The antenna design was executed using the high-frequency structure simulator design software, utilizing the dielectric ceramic as the resonator, Cu strip as the feedline, and FR4 as the substrate. The maximum energy was coupled to the antenna when the resonator was placed at 11.75 mm on the substrate. The fabricated CDRA, using appropriate simulated parameters, resonated at 7.67 GHz, offering a return loss (S11) of −32.64 dB and an impedance bandwidth of 10.73%. Furthermore, the CDRA displayed a voltage standing wave ratio of 1.04, ensuring a nearby ideal impedance match and a bandwidth of 810 MHz to support high-speed data transmission.

Effects of turbulent Prandtl number on supercritical carbon dioxide turbulent flow with high heat flux in vertical round tube

Supercritical carbon dioxide (sCO2) is a promising working medium for coal-fired power plants, high-temperature solar power systems, nuclear reactor systems, and fuel cells owing to its high efficiency and inertness. In these cases, the sCO2 is in a round tube under high temperature and pressure, far from the pseudo-critical point. Here, the thermophysical properties of sCO2 changes, resulting in large prediction errors. In this study, a conjugate heat transfer model with the k-ε turbulent model was created to analyze the tube performance of the sCO2, and the effects of turbulent Prandtl number (Prt) on the sCO2 turbulent flow with high heat flux were examined through experimental and numerical investigations. Prt had a considerable effect on the performance of the sCO2 turbulent flow far from the pseudo-critical point. The mean relative errors of the inner wall temperature and convective heat transfer coefficient were reduced by approximately 13% and 27%, respectively, when Prt was decreased from 1 to 0.55. For the sCO2 turbulent flow with a high heat flux, constant Prt values of 0.55–0.6 were applicable. The findings afford key insights for the development of sCO2 turbulent flow with high heat flux.

Iodine-Doped Reduced Graphene Oxide and Titanium Dioxide Nanocomposite as Effective Amperometric Glucose Biosensor

The current study fabricated a non-enzymatic glucose sensor based on iodine-doped reduced graphene oxide with titanium dioxide (I-rGO@TiO2) nanocomposite. Initially, the sol-gel and thermal reduction methods synthesized titanium dioxide (TiO2) nanoparticles and reduced graphene oxide (rGO). Then, the hydrothermal technique was utilized to synthesize a composite of I-rGO@TiO2 by combining I-rGO and TiO2 in a 1:4 ratio. The XRD spectrum and TEM images revealed that in the I-rGO@TiO2 nanocomposite, nanocrystalline anatase titanium is randomly distributed on the I-rGO sheets. Fourier transforms the infrared spectrum of nanocomposite to show the presence of titanium and oxygen bond characteristics peak between 400 to 850 cm−1. Iodine molecules peak at 100 cm−1 were obtained in Raman spectra. The AC conductivity and dielectric properties of the nanocomposite were analyzed. For the sensor fabrication, the indium tin oxide electrode surface is modified by I-rGO@TiO2, and the electrochemical performance was examined. At room temperature, the sensor demonstrated a wider linear detection range (0.5−10 mM). The lower detection limit of the sensor was 0.23 μM (S/N=3), and the sensitivity was 221.69 μA mM−1 cm−2. The I-rGO@TiO2 nanocomposite shows a positive temperature coefficient via the thermal activation of charge carriers and a conductivity of 3.82 × 10−5 Ω−1m−1 at 200 °C. Additionally, the antibacterial properties of the was evaluated, and dose-dependent properties were observed towards E. coli and Bacillus subtilis bacterium.

Influence of TiO2 addition on the Mg4Nb2O9 ceramic phase and its application in the radiofrequency region

In this work, the dielectric properties of (1-x) Mg4Nb2O9 – (x) TiO2 composite ceramics in radiofrequency and the microwave region were evaluated. X-ray diffraction demonstrated that Mg4Nb2O9 (MNO) reacted with TiO2 resulting in the formation of new crystalline phase Mg5(Nb0.625Ti0.375)4O15. Complex Impedance Spectroscopy (CIS) analysis was realized to analysis the electrical properties of materials, whereas was observed that activation energy (Ea) decrease from 1.64 to 1.37 eV with an increase in TiO2 concentration. Temperature capacitance coefficient (TCC) was obtained and showed that at different frequencies all materials could be used as Class 1 ceramic capacitors according to EIA RS-198. In the Microwave region, MNO – TiO2 demonstrated ε’r between 12.07 (MNO) and 14.08 (MNO18T), tan δ values varying of 2.64 × 10-4 (MNO) up to 5.92 × 10−4 (MNOT14). Regarding the temperature coefficient of resonant frequency (τf) was observed that the values decreased with the increase in TiO2, with the value closest to zero being that of pure MNO (τf = −27 ppm.°C−1). The results presented show that materials evaluated could be utilized in devices that can be act in radio frequency (RF) and microwave (MW) regions.

Dynamics and thermal stability of the bypass polymerase, DinB homolog (Dbh)

The DinB homolog polymerase (Dbh) is a member of the Y-family of translesion DNA polymerases that can synthesize using a damaged DNA template. Since Dbh comes from the thermophilic archaeon Sulfolobus acidocaldarius, it is capable of functioning over a wide range of temperatures. Existing X-ray structures were determined at temperatures where the protein is least active. Here we use NMR and circular dichroism to understand how the structure and dynamics of Dbh are affected by temperature (2°C–65°C) and metal ion binding in solution. We measured hydrogen exchange protection factors, temperature coefficients, and chemical shift perturbations with and without magnesium and manganese. We report on regions of the protein that become more dynamic as the temperature is increased toward the functional temperature. Hydrogen exchange protection factors and temperature coefficients reveal that both the thumb and finger domains are very dynamic relative to the palm and little-finger (LF) domains. These trends remain true at high temperature with dynamics increasing as temperatures increase from 35°C to 50°C. Notably, NMR spectra show that the Dbh tertiary structure cold denatures beginning at 25°C and increases in denaturation as the temperature is lowered to 5°C with little change observed by CD. Above 35°C, chemical shift perturbation analysis in the presence and absence of magnesium and manganese reveals three ion binding sites, without DNA bound. In contrast, these bound metals are not apparent in any Dbh crystal structures of the protein without DNA. Two ion binding sites are confirmed to be near the active site, as reported in other Y-family polymerases, and we report a novel ion binding site in the LF domain. Thus, the solution-state structure of the Dbh polymerase is distinct from that of the solid-state structures and shows an unusually high cold denaturation temperature.

Corrosion, wear and machinability studies on scrap aluminium alloy wheel based metal matrix composite

Recycled materials, especially scrap aluminum alloy wheels with reinforcement castings, are gaining applications in various fields such as aerospace, naval, military, and automobile. In this research, Honda car alloy wheels are stir-cast with 5% alumina as reinforcement and subjected to corrosion, wear, and machinability studies. Corrosion studies were conducted to evaluate the corrosion current density (ICorr), corrosion potential (ECorr), and corrosion rate for the cast aluminum metal matrix composite. The wear studies with different loads, i.e., 50 N, 60 N, 70 N, and 80 N, were performed on the specimen and investigated the coefficient of friction, frictional force, and pin temperature. The sliding load has a significant effect on wear performance, and for the sliding load of 80 N, the wear recorded was 2574.83 µm. The electrochemical machinability studies with voltage, duty cycle, and concentration of citric acid electrolyte are performed on the machining rate and surface corrosion factor. Analysis of the electrochemical machining process with PROMETHEE-II shows that 7 V, 60% duty cycle, and 30 g/L electrolyte concentration are estimated to be the best combination for a higher machining rate and a lower surface corrosion factor. KEY WORDS: Alumina, Machining rate, Nyquist plot, Electrochemical machining, PROMETHEE-II Bull. Chem. Soc. Ethiop. 2024, 38(4), 1163-1175.                                                          DOI: https://dx.doi.org/10.4314/bcse.v38i4.27       

Investigation of the Positive Temperature Coefficient Resistivity of Nb-Doped Ba0.55Sr0.45TiO3 Ceramics

The demands of low-Curie-temperature (~−10 °C) positive temperature coefficient (PTC) thermistors are increasing in advanced precision integrated circuits and other industries. In this paper, the Nb-doped Ba0.55Sr0.45TiO3(BST)-based PTC resistivity materials are reported. The effects of the sintering process, especially the cooling rate on the PTC properties of the material, are investigated. The results indicate that the Ba0.55Sr0.45Ti0.9985Nb0.0015O3 composition of the prepared PTC ceramics demonstrates promising PTC characteristics. These include a Curie temperature as low as −13 °C, a high temperature coefficient of 0.296 at −3.4 °C, a large enough resistivity change of 3.1 over a narrow phase transition temperature range of approximately 38 °C, and moderate resistivity below the Curie temperature. Such properties suggest that the Ba0.55Sr0.45Ti0.9985Nb0.0015O3 ceramics are likely suitable for use in thermal management systems designed for low-temperature control.

Strain and Temperature Sensing Based on Different Temperature Coefficients fs-FBG Arrays for Intelligent Buoyancy Materials

The temperature and strain fields monitoring during the preparation process of buoyancy materials, as well as the health status after molding, are important for mastering the mechanical properties of buoyancy materials and ensuring the safety of operators and equipment. This paper proposes a short and high-density femtosecond fiber Bragg grating (fs-FBG) array based on different temperature coefficients fibers. By optimizing the parameters of femtosecond laser point-by-point writing technology, high-performance fs-FBG arrays with millimeter level gating length and millimeter level spatial resolution were prepared on two types of fibers. These were successfully embedded in buoyancy materials to achieve in-situ online monitoring of the curing process and after molding. The experimental results show that the fs-FBG array sensor has good anti-chirp performance and achieves online monitoring of millimeter-level spatial resolution. Intelligent buoyancy materials can provide real-time feedback on the health status of equipment in harsh underwater environments. The system can achieve temperature monitoring with an accuracy of 0.56 °C and deformation monitoring with sub-millimeter accuracy; the error is in the order of micrometers, which is of great significance in the field of deep-sea exploration.

A high‐precision voltage reference with a curvature‐compensated bandgap for fluorescence detection

SummaryFluorescent optical fiber temperature sensors require accurate online temperature monitoring in hazardous environments with strong electromagnetic fields, high voltages, flammability, or explosiveness. This imposes stringent requirements on the temperature coefficient stability of the bandgap reference (BGR) circuit. To address these challenges, this paper proposes a high‐order curvature compensation bandgap reference (HCC_BGR) circuit fabricated using a 0.18‐μm bipolar‐CMOS‐DMOS (BCD) process. A traditional first‐order bandgap reference (TRA_BGR) circuit is also fabricated for comparison. Experimental results demonstrate that the proposed HCC_BGR circuit generates a stable 1.22‐V reference voltage with a low‐temperature coefficient of 5.56 ppm/°C from −20°C to 85°C. Compared to the TRA_BGR circuit, the HCC_BGR reduces the temperature coefficient by 3.07 times. Furthermore, the low‐dropout regulator (LDO) using the proposed HCC_BGR exhibits excellent line sensitivity of 1.52%/V from 3.4 to 5 V.

In situ high-temperature transmission electron microscopy investigation of dynamic element migration for Sm-Co-Fe-Cu-Zr sintered magnets

The investigation delved into the dynamic migration of elements and the evolution of interface structures within the Sm(CobalFe0.09Cu0.09Zr0.03)7.2 magnet as temperature increased, employing high-temperature transmission electron microscopy. Notably, the Cu distribution exhibited temperature susceptibility. Elevating the temperature from room temperature (RT) to 400 °C led to a notable expansion in the distribution width of Cu, ranging from 28.5 to 50.8 nm. Simultaneously, the average Cu content at the cell boundaries decreased from 14.4 to 11.6 at.%. According to the high-temperature in-situ experimental results of the transmission electron microscopy thin-film samples, the derived diffusion coefficients, D300°Cand D400°C, were determined as 0.0525 nm2/s and 1.414 nm2/s, respectively. The significantly higher D400°C compared to D300°C underscores the considerable influence of temperature on Cu element diffusion behavior. The simulation results demonstrate that the trend of magnetic properties variation at different temperatures closely aligns with the observed trend. Subsequent calculation of the temperature coefficient of intrinsic coercivity (β) reveals that |β300–400°C| is notably higher than |βRT-300°C|. This suggests a substantial impact of Cu diffusion-induced deterioration on the β. Moreover, micromagnetic simulation results delineated the reverse magnetization process for magnets at varying temperatures, revealing that the presence of the Cu diffusion region diminished the pinning effect of the cell boundary phase. Furthermore, a wider Cu diffusion region facilitated easier magnetic moment reversal at the cell boundary phase, resulting in a marked deterioration of intrinsic coercivity. This elucidates that the formation of the Cu diffusion region stands as one of the primary reasons for the sharp decline in magnetic properties of Sm2Co17-type magnets under high-temperature conditions.

Influence of positive temperature coefficient and battery aging on external short circuit for 18,650-type battery

Influence of positive temperature coefficient and battery aging on external short circuit for 18,650-type battery

Electrical actuation of single-crystal diamond MEMS resonators at high temperatures

Achieving efficient low-voltage actuation of microelectromechanical system (MEMS) resonators in high-temperature environments poses a difficult topic due to the thermal interference and the risk of high-temperature failure. In this work, the single-crystal diamond (SCD) resonators fabricated through the ion implantation-assisted lift-off (IAL) technique exhibit a SCD-on-SCD cantilever structure. We propose an electrical actuation system based on the electrostatic effect specifically designed for SCD MEMS resonators with a low radio-frequency amplitude of ∼ 100 mV. The SCD resonators demonstrate stable and efficient actuation across a wide temperature range, from room temperature to 500 °C. Importantly, the actuation voltage exhibits little impact on the resonance frequency and the Q factor of the resonator. The SCD resonator showcases exceptional thermal stability in resonance frequency, with a low temperature coefficient of frequency (TCF) below −12 ppm/°C up to 500 °C. The developed actuation scheme holds tremendous potential as a robust platform for realizing SCD MEMS devices, particularly in applications requiring high integration at high temperatures.

Development of new materials for electrothermal metals using data driven and machine learning.

After adopting a combined approach of data-driven methods and machine learning, the prediction of material performance and the optimization of composition design can significantly reduce the development time of materials at a lower cost. In this research, we employed four machine learning algorithms, including linear regression, ridge regression, support vector regression, and backpropagation neural networks, to develop predictive models for the electrical performance data of titanium alloys. Our focus was on two key objectives: resistivity and the temperature coefficient of resistance (TCR). Subsequently, leveraging the results of feature selection, we conducted an analysis to discern the impact of alloying elements on these two electrical properties.The prediction results indicate that for the resistivity data prediction task, the radial basis function kernel-based support vector machine model performs the best, with a correlation coefficient above 0.995 and a percentage error within 2%, demonstrating high predictive capability. For the TCR data prediction task, the best-performing model is a backpropagation neural network with two hidden layers, also with a correlation coefficient above 0.995 and a percentage error within 3%, demonstrating good generalization ability. The feature selection results using random forest and Xgboost indicate that Al and Zr have a significant positive effect on resistivity, while Al, Zr, and V have a significant negative effect on TCR. The conclusion of the composition optimization design suggests that to achieve both high resistivity and TCR, it is recommended to set the Al content in the range of 1.5% to 2% and the Zr content in the range of 2.5% to 3%.

Effect of Deposition Pressure and Temperature on Tungsten Thin-Film Heater for Phase-Change Switch Applications

Tungsten (W) film is increasingly utilized in various microheater applications due to its numerous advantages. These advantages include a high melting point, positive constant temperature coefficient of resistance (TCR), good mechanical stability, and compatibility with semiconductor processes. In this paper, deposition parameters for enhancing the properties of W film were investigated, and an optimized microheater was fabricated. It was found that the deposition temperature and pressure can modify the TCR to be negative or positive and the crystalline phase of W films to be alpha phases or mixed with beta phases. A W film deposited under 650 °C with a pressure of 1 pa has a positive TCR and pure alpha phase crystalline structure. We applied this optimized W film as a microheater in an RF phase-change switch (RFPCS), and the maximum voltage of the optimized W microheater increased by at least 48% in this work. By optimizing the microheater, the phase-change switch can be successfully actuated in both on and off states, demonstrated by the Raman results of the phase-change material. A voltage pulse of 20 V/200 ns was enough to turn the switch off with MΩ, and 11 V/3 μs could turn the switch on with 138 Ω. The optimized microheater and device can cycle 500 times without failure. The insertion loss and isolation of the device at 20 GHz was 1.0 dB and 22 dB.

Electrothermal Instabilities in Barium-Titanate-Based Ceramics

An electrothermal analysis for barium-titanate-based ceramics is presented, combining the Heywang–Jonker model for the electric resistivity with a heat dissipation mechanism based on natural convection and radiation in a one-dimensional model on the device level with voltage as the control parameter. Both positive-temperature-coefficient (PTC) and negative temperature coefficient (NTC) effects are accounted for through the double Schottky barriers at the grain boundaries of the material. The problem formulated in this way admits uniform and non-uniform multiple-steady-state solutions that do not depend on the external circuit. The numerical bifurcation analysis reveals that the PTC effect gives rise to several multiplicites above the Curie point, whereas the NTC effect is responsible for the thermal runaway (temperature blowup). The thermal runaway phenomenon as a potential thermal shock could be among the possible reasons for the observed thermomechanical failures (delamination fracture). The theoretical results for the NTC regime and the thermal runaway are in agreement with the experimental flash sintering results obtained for barium titanate, and 3% and 8% yttria-stabilized zirconia.

Design of a Negative Temperature Coefficient Temperature Measurement System Based on a Resistance Ratio Model

In this paper, a temperature measurement system with NTC (Negative Temperature Coefficient) thermistors was designed. An MCU (Micro Control Unit) primarily operates by converting the voltage value collected by an ADC (Analog-to-Digital Converter) into the resistance value. The temperature value is then calculated, and a DAC (Digital-to-Analog Converter) outputs a current of 4 to 20 mA that is linearly related to the temperature value. The nonlinear characteristics of NTC thermistors pose a challenging problem. The nonlinear characteristics of NTC thermistors were to a great extent solved by using a resistance ratio model. The high precision of the NTC thermistor is obtained by fitting it with the Hoge equation. The results of actual measurements suggest that each module works properly, and the temperature measurement accuracy of 0.067 °C in the range from −40 °C to 120 °C has been achieved. The uncertainty of the output current is analyzed and calculated with the uncertainty of 0.0014 mA. This type of system has broad potential applications in industry fields such as the petrochemical industry.

A 2.41 ppm/°C bandgap voltage reference with second‐order curvature compensation

SummaryA current‐mode (CM) bandgap voltage reference (BGR) with second‐order curvature compensation is presented in this paper. The proposed CM BGR offers a simple compensation structure that requires only six additional transistors compared with traditional BGR designs, making it an attractive solution for low temperature coefficient (TC) voltage references. Proportional to absolute temperature (PTAT) current digital‐to‐analog converters (DACs) are used to suppress the effect of process variation and device mismatch on TC. The compensation signal is generated using the voltage difference of two bipolar junction transistor (BJT) emitter–bases whose currents are the sum and difference of the PTAT current and the zero to absolute temperature (ZTAT) current, respectively. The proposed CM BGR is designed with 0.18‐μm BIPOLAR CMOS DMOS process. A TC is 2.41 ppm/°C over a wide temperature range of −40°C to 150°C. The linear sensitivity of the supply voltage from 1.2 to 2 V is 0.027%/V. With an active area of 0.0721 mm2, it consumes 68 μA at room temperature. The integrated output noise from 0.1 to 10 Hz is 21.9 μV.

Wireless Temperature Measurement for Curved Surfaces Based on AlN Surface Acoustic Wave Resonators

In this paper, we propose a novel method for temperature measurement using surface acoustic wave (SAW) temperature sensors on curved or irregular surfaces. We integrate SAW resonators onto flexible printed circuit boards (FPCBs) to ensure better conformity of the temperature sensor with the surface of the object under test. Compared to traditional rigid PCBs, FPCBs offer greater dynamic flexibility, lighter weight, and thinner thickness, which make them an ideal choice for making SAW devices working for temperature measurements under curved surfaces. We design a temperature sensor array consisting of three devices with different operating frequencies to measure the temperature at multiple points on the surface of the object. To distinguish between different target points in the sensor array, each sensor operates at a different frequency, and the operating frequency bands do not overlap. This differentiation is achieved using Frequency Division Multiple Access (FDMA) technology. Experimental results indicate that the frequency temperature coefficients of these sensors are −30.248 ppm/°C, −30.195 ppm/°C, and −30.115 ppm/°C, respectively. In addition, the sensor array enables wireless communication via antenna and transceiver circuits. This innovation heralds enhanced adaptability and applicability for SAW temperature sensor applications.